Fiber Runner
Used to carry the cables horizontally throughout the system. Accepts cover and fittings.
Used to carry the cables horizontally throughout the system. Accepts cover and fittings.
Used to carry the cables horizontally throughout the system. Accepts cover and fittings.
Quickly joins two sections of channel and/or fittings. Tighten and release bolts by fingers, absolutely toolless.
Quickly joins two sections of channel and/or fittings. Tighten and release bolts by fingers, absolutely toolless.
Quickly joins two sections of channel and/or fittings. Tighten and release bolts by fingers, absolutely toolless.
Attaches to 4"x15" channel and/or fittings to creat a 90°horizontal branch from a straight horizontal run.
Attaches to 4"x10" channel and/or fittings to creat a 90°horizontal branch from a straight horizontal run.
Attaches to 4"x5" channel and/or fittings to creat a 90°horizontal branch from a straight horizontal run.
Attaches to 4"x10" channel to creat a 90° horizontal elbow from anywhere of a straight horizontal run.
Attaches to 4"x5" channel to creat a 90° horizontal elbow from anywhere of a straight horizontal run.
Attaches to 4"x15" channel and/or fittings to create a horizontal four way cross intersection with two 4"x15" exits.
Attaches to 4"x10" channel and/or fittings to create a horizontal four way cross intersection with two 4"x10" exits.
Attaches to 4"x5" channel and/or fittings to create a horizontal four way cross intersection with two 4"x5" exits.
Attaches to 4"x15" channel and/or fittings to creat a 90°horizontal elbow from a straight horizontal run.
Attaches to 4"x10" channel and/or fittings to creat a 90°horizontal elbow from a straight horizontal run.
Attaches to 4"x5" channel and/or fittings to creat a 90°horizontal elbow from a straight horizontal run.
Attaches to 4"x15" channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with 45° down elbow to change level of a horizontal run.
Attaches to 4"x10" channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with 45° down elbow to change level of a horizontal run.
Attaches to 4"x5" channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with 45° down elbow to change level of a horizontal run.
Attaches to 4"x15" channel and/or fitting to create a 45° downward angle from a straight horizontal run. Used with 45° up elbow to change level of a horizontal run.
Attaches to 4"x10" channel and/or fitting to create a 45° downward angle from a straight horizontal run. Used with 45° up elbow to change level of a horizontal run.
Attaches to 4"x5" channel and/or fitting to create a 45° downward angle from a straight horizontal run. Used with 45° up elbow to change level of a horizontal run.
Attaches any 4"x15" fitting or channel to any 4"x10" fitting or channel.
Attaches any 4"x10" fitting or channel to any 4"x5" fitting or channel.
Attaches to 4"x10" channel and/or fittings to create a 90° horizontal branch with a 4"x5" exit from straight horizontal run.
Attaches to 4"x10" channel and/or fittings to create a horizontal four way cross intersection with two 4"x5" exits.
Attaches any 4"x10" fitting or channel to any 4"x5" fitting or channel.
90 MOVABLE EXIT W/O CORRUGATED PIPE KIT
Assembles onto 4"x5",4"x10",4"x15" channel, spilling over the side into a 90mm movable exit without corrugated pipe.
90 MOVABLE EXIT WITH CORRUGATED PIPE KIT
Assembles onto 4"x5",4"x10",4"x15" channel, spilling over the side into a 90mm movable exit with corrugated pipe.
Assembles onto 4"x5",4"x10",4"x15" channel, spilling over the side into a 130mm movable exit.
Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from 4"x5" channel,4"x5" horizontal tee fitting, or 4"x5" exit on 4"x10" vertical tee.
Used to support the 4"x15" system by spanning two existing threaded rod drops. Can be installed from above or below.
Used to support the 4"x10" system by spanning two existing threaded rod drops. Can be installed from above or below.
Used to support the 4"x5" system by spanning two existing threaded rod drops. Can be installed from above or below.